Harrison Salmon Rod by Neil Scott Review of the Harrison salmon rod. The moment had finally arrived There I was…
Review of the Harrison salmon rod. The moment had finally arrived There I was with half a rod remaining in my hand, a bird’s nest big enough for an eagle, and the top half of my rod floating away through the waves. I’d had five seasons service and some eighty salmon from my Tri-Cast before it had exploded at the ferrule mid cast!
Having just arrived on my annual pilgrimage to the Rangitata River what was I to do. Back to my old Graphcast or fibreglass rods and the Abu 10,000 – I don’t think so. Two days earlier a fellow had turned up at the mouth from Christchurch with this new 13′ shiny stick which instantly caught my eye and when I enquired the reply was simple, it was a “Harrison” from the Fisherman’s Loft I had managed to have a hold of it and it felt superb, but as my old rod was still casting okay I didn’t want to seem to anxious as he could already see how annoyed I was at continually being outcast during the day. Luckily enough a friend of mine in Australia was flying in the next day so I had already decided. I want one!
I found the Harrison’s just inside the door and had been fondling one for about five minutes before the salesman came over and said “Can I help you Sir” I’ll have it!
He seemed rather perplexed that I hadn’t asked the price or anything about its performance and construction, I was in the van and halfway back to the Rangitata River before he got the receipt out of the till.
The next morning couldn’t arrive soon enough. I fished the next two days spending at least 24 hours on the water for no result. I was amused at how easy the transition from 12′ Tri-Cast to the 13′ Harrison had been My Daiwa SL 20 SH matched perfectly. The fish were simply not around, however, the next day would be different.
I have always been a long distance caster but the regulars at the mouth were getting inquisitive as to this new rod and where it had come from By the end of the day the envy would grow.
As the tide was receding I could sense a hook up was eminent I fished for another half an hour before bang! I was on. Initially, I felt like panicking, a new rod. The first fish for the season and the fish had cut across into the river current and was taking more line than I would have liked. I line tuned the drag and it was on for young and old. It was a beautiful calm sunny day and the sight of the silver master leaping too and fro had everyone looking. Finally, I played the fish out. So what was my secret? It’s a Harrison!
As the adrenaline pumped I was straight back in for number two. I was so impressed with the way my new rod had handled the fish I was over the moon At about 1 pm a stiff southeaster popped up but I was so fired up I continued to fish on. As only three of us now remained on the beach I was able to drop the rod tip and cast horizontally and cast and still pick up 70 yards
Just as I was about to pick the lure from the water it was attacked by a silver `flash that took off like a steam train. Luckily the drag was lightly set as the fish kept going taking about 50 meters of the line with it before slowing. I was able to play it out without too much of a problem.
For some reason, I had never in 20 seasons been able to land a fish over 30 lbs but the day had finally arrived. I set off and had the last fish weighed. The result was 14.9 kgs. I was ecstatic.
For the season my tally was 14 salmon all in the surf on the Harrison. There was a number of days when I picked up two and nobody else could get at them. For the 14 fish, I collected the Anderson Trophy for the Heaviest Fish for the Season South Canterbury Branch of the New Zealand Salmon Anglers Association 14.9.
Special thanks to Dr Harrison.
Please note that the rod component prices quoted in this article may no longer be correct.
Harrison Salmon Rod
Salmon anglers who dream of that mighty long distance cast need look no further. Harrison Advanced Rods in the United Kingdom have produced a 13′ salmon/surf rod in time for the salmon season. Very limited supplies have been produced to special order for New Brighton Sports, Christchurch.
These are 3.95m (13′) 2 piece, three and a half pound blanks, made of high percentage graphite with a 3K woven graphite overlay. The final blank has been finished with a translucent brown epoxy coating which looks particularly attractive in the sunlight.
The blank is a full 13′ which should give a little extra leverage for a longer cast! We have included a full parts list for those contemplating building the rod themselves, or if you prefer New Brighton Sports offer a full quality building service to provide you with a completed rod ready to fish. The cost of this service depends on the final specifications.
Some anglers may prefer to use higher quality Silicon Carbide guides throughout.
The Harrison salmon rod blank is supplied by the manufacturer in England with a set of classy decals for that quality professional end result. Components List:
Harrison 3.5 lb blank: $499.00
Fiji butt cap: $3.80
Fuji 22mm trigger grip reel seat: $17.00
Hyperlon hand grip: $20.00
Fuji BTHG guides
1 x 25mm: $6.00
1 x 20mm $5.50
2 x 16mm $10.00
2 x 12mm $9.50
2 x 10mm $9.00
1 x 8mm $4.50
Fuji tip guide 3.2mm Silicon Carbide $11.00
Binding thread: $20.00
Epoxy rod finish: $30.00
The total cost of components approx.: NZ$645.30
This post was last modified on 16/03/2018 12:35 pm
By Dick Marquand A line up of southern bluefin tuna from the 1978 Nationals. From left are Tom Beange, Roy…
Taxidermy Fish with Monty Wright Photo (1) Denis Brundell’s 16.5lb (7.5kg) brown trout. Each time we head out fishing we…
Landbased Kingfish Downunder in NZ - How to Catch a Yellowtail Kingfish off the Rocks - Including Excellent Advice for…
Surfcasting Baits Using different baits to target different species Surfcasting bait is a very interesting subject. Different baits are used…
Fly Fishing - Getting Started - Why quality advice really makes a huge difference By Graeme Smith Fly Fishing Getting…
All Rights Reserved © fishingmag.co.nz 1999 - 2020Read More